Edimax IC-7100 User Manual Download Page 31

Page: 31 / 172

1.8 Logging in the Management Interface

Make sure the network camera is correctly powered (Power LED is on), and

then launch Internet Explorer and type the IP address of the network camera in

address bar of Internet Explorer. You should be prompted to input the user

name and password:

Default user name is

„admin‟ and password is „1234‟. Click „OK‟ to continue

after user name and password has entered.

If you

‟re rejected, maybe the password has been modified previously. This

should not happen if this is a newly-purchased camera, however, if you get the

camera from someone else, the password would be changed. Please try to

obtain the correct user name / password, or you

‟ll have to reset the camera.

Summary of Contents for IC-7100













































































































































































Search results

Summary of Contents for IC-7100

Reviews:

Related manuals for IC-7100

Brands by name

Popular brands

Edimax IC-7100, User Manual

Search results

Summary of Contents for IC-7100

Reviews:

Related manuals for IC-7100

Brands by name

Popular brands