Edimax IC-7100, User Manual

Page: 46 / 172

45
2.3 Pan and Tilt
This network camera supports pan and tilt function, as you explored in last
section. You can also make the camera move automatically in pan and tilt
menu by defining a set of pre-defined path.
You can access this menu by clicking
„PTZ‟ on the top of web management
interface.
2.3.1 Preset Points
You can define the camera position and save the position so you can recall the
position later again. This camera provides 9 memory slots; follow the following
instructions to move the camera and set a new preset point:
1. Select a memory slot from
„Available Positions‟ dropdown menu first.
2. To move the camera, click the position of labeled text (not shown on image)
on the image to move the camera to the direction. You may need to set the
Pan / Tilt speed to a slower setting, so you can move the camera in a more
accurate manner.
UP
DOWN
RIGHT LEFT
UPPER
RIGHT
LOWER
RIGHT
UPPER
LEFT
LOWER
LEFT