Edimax BR-6476AC User Manual Download Page 39

Page: 39 / 119

Click “Network”, select “LAN Settings”. Enter IP Address, Subnet Mask. Then
click “Save” and wait for the router reboot automatically.

The router's LAN IP address and WAN IP address cannot be on the same IP
segment. If not, the router will not be able to access Internet.

Be sure to make a note of any changes you apply to this page. If you change

the LAN IP address of the router, you have to open a new connection to the

new IP address and log in again. Also, you have to set the default gateway
addresses of all LAN PCs to this new IP address.

MAC Address

Displays the Router’s LAN MAC address.

IP Address

Displays the Router’s LAN IP address.

Subnet Mask

Displays the Router’s LAN subnet mask.

Summary of Contents for BR-6476AC
























































































































Search results

Summary of Contents for BR-6476AC

Reviews:

Related manuals for BR-6476AC

Brands by name

Popular brands

Edimax BR-6476AC, User Manual

Search results

Summary of Contents for BR-6476AC

Reviews:

Related manuals for BR-6476AC

Brands by name

Popular brands