Edimax BR-6476AC, User Manual

Page: 110 / 119

107
4.
I can’t open the web based configuration interface.
a. Please ensure your computer is set to use a dynamic IP address. Refer to
the user manual for guidance if you are unsure how to do this.
5.
How do I reset my device to factory default settings?
a. To reset the device back to its factory default settings, press and hold the
WPS/Reset button for over 10 seconds, until all LEDs are off. Please wait a
few minutes for the product to restart. When the device restarts, all
settings will be reset. Default settings are displayed on the product label on
the back of the device.
6.
My network is configured to use static IP addresses. How can I assign a
static IP address to my BR-6476AC?
If your ISP gives you a fixed or static IP address for Internet connection, you will
need to gather the following information:
a. IP Address
b. Subnet Mask
c. Gateway
d. DNS Server
e. Alternate DNS Server (Optional)
7.
I forgot my password.
a. Reset the router to its factory default settings and use the default username
admin and default password admin. Default settings are displayed on the
product label on the back of the device, as shown above.
8.
Remove Wireless Network from Your PC.
a. If you change wireless settings on your wireless device, you must remove them
accordingly from your PC; otherwise, you may not be able to wirelessly connect
to this device. Below describes how to remove a wireless network from your PC.