SEASTAR and BAYSTAR Hydraulic Steering Systems
iii
Our manual hydraulic steering systems are simple and ef ficient.
The basic system consists of three main components;
1) the helm pump, 2) the cylinder, and 3) the hose or tubing required
to connect the cylinder to the helm pump.
These basic components are necessar y in all applications. However as
the system variables increase (ie: multiple engines, rudders, steering
stations and autopilots), additional components may be required.
1. The Helm Unit.
The helm pump is an axial piston pump specifically designed for
manual steering. It has a built-in lock valve to prevent the steering
load from feeding back to the driver. The lock valve will not allow
the rudder or drive unit to move until you move it with the steering
wheel. The lock valve section of the helm also includes a relief
valve. This relief valve provides over-pressure protection for
mechanical components and hydraulic hoses and fittings.
2. The Cylinder.
The most impor tant dif ferences between the variety of steering
systems available is the cylinder selection. Both BayStar and
SeaStar systems have a cylinder for most steering applications.
3. Hoses and Tubes.
Required to provide a path for the fluid to flow under pressure from
the helm pump to the cylinder.
The system is a two-line system. This makes operation ver y simple.
1)
The steering wheel, which is attached to the helm pump, is
rotated in the desired direction (ie: a turn to starboard or
clockwise rotation).
2)
Oil is pumped out the corresponding por t from the rear of the
helm into the starboard line and then into the cylinder.
3)
This causes the cylinder rod, which is attached to the vessels
rudder or drive unit, to move (ie: rod moves to por t) thus
causing the vessel to alter course.
4)
Oil displaced from the opposite end (ie: the por t end) of the
cylinder flows (ie: into the por t line) back to the helm pump.
5)
For steering in the opposite direction, simply turn the helm the
other way.
6)
When no course corrections are required, the integral lock valve
holds the rudder or drive unit stationar y.
Teleflex Hydraulic Steering
The System: How it works
Summary of Contents for 388CC
