Manual
PROGRAME - VEL - 2
8-18)
Activating on the parameters adjustment keys (09)
the keys which are under the display we can adjust the
speed for the desired value of 35.0°C/min
8.
19
Adjusting burn time (BASELINES)
Note:
The burn times Pat-1 and Pat-2 for the sintering/infiltration processes start
in Hours. Ex: H1.15 corresponds to one hour and fifteen minutes. We remind you that
the minimum time allowed for Pat-1 and Pat-2 can be zero Ex. H0.00 and the maximum
time can be nine hours and fifty-nine minutes.Ex. H9.59.
8-20)
Programming baseline 1. Activating the burning
time key (13) once, the display will shoe the message
“Pat.1”.
SELECIONE - PAT- 2
PROGRAME - PAT - 1
RECEITA - PADRÃO
8-21)
Activating the parameters adjustment keys (09),
under “1” on the display it will show the time that comes
from the factory for the standard recipe:
“H0.15”
.
8-22)
Activating the parameters adjustment keys (09), we
can adjust the burn time to the desired value, “
H0.10
”,
that is 10 minutes.
SELECIONE - PAT- 2
8-23)
Programming baseline 2. Activating the burning
time key (13) twice, the display will shoe the message
“Pat.2”.
18
Summary of Contents for Fv Plus Sinter
Page 1: ...Manual CAPA ...
