Acclarix LX4 Diagnostic Ultrasound System User Manual Getting Started
- 20 -
Figure 3-10 Transducer socket number
NOTE:
1. Once the transducer is connected to the main unit, please do not reinstall it frequently.
This is to avoid poor contact between the transducer and the main unit.
2. Only plug C5-2MD transducer in the leftmost transducer socket (socket 1). If user
connect transducer C5-2MD to other three transducer sockets,
a message of “Probe
C5-2MD cannot be connected t
o this slot” will pop up, please connect the transducer
to socket 1.
WARNING
Do not touch the pin of transducer connector.
CAUTION
Do not plug in or pull out the connector when the device is activated. This is to avoid
uncontrollable damage to the transducer and the main unit.
