Helios FM 20/100 W, user manual– 12/2011
Page 46
Head Office : Parc d’activites Kennedy - 20, avenue Neil Armstrong – F-33700 Bordeaux-Merignac (France)
Tel +33 (0)5 57 928 928 – Fax +33 (0)5 57 928 929 –
www.ecreso.com – [email protected]
PS
(RDS.MAINDSN.PS) – read/write
With this parameter, set the PS (Program Station)
8-digit code
MS
(RDS.MAINDSN.MS) – read/write
With this parameter, indicate whether the program is Music or Speech to automatically adjust the sound level
of the RDS receiver.
0 (music) or 1 (speech)
DI
(RDS.MAINDSN.DI) – read/write
With this parameter, set the DI (Decoder Identification) which enables an RDS receiver’s audio level to be
adjusted according to the type of received audio (mono or stereo, static or dynamic PTY, compressed or not,
with or without artificial head).
From 0 to 15, as indicated in the table below.
Mono / Stereo
With / Without
artificial head
Compressed /
non
compressed
static / dynamic
PTY
0
mono
without
non
static
1
mono
without
non dynamic
2
mono
without compressed
static
3
mono
without compressed
dynamic
4
mono with non
static
5
mono with non dynamic
6
mono with compressed
static
7
mono with compressed
dynamic
8 stereo
without
non
static
9 stereo
without
non dynamic
10 stereo
without compressed
static
11 stereo
without compressed
dynamic
12 stereo
with
non
static
13 stereo
with
non dynamic
14 stereo
with
compressed static
15 stereo
with
compressed dynamic
TA/TP
(RDS.MAINDSN.TATP / RDS.MAINDSN.TA / RDS.MAINDSN.TA) – read/write
With this parameter, enable or disable the TA (Traffic Announcement) / TP (Traffic Program). Enabling the
TA instantaneously switches an RDS receiver onto road information reports; at the end of the report, the
receiver will automatically go back to its former operating state. Enabling the TP shows RDS receivers that
the allocated station is likely to broadcast road information. You may enable both the TA and the TP, the TP
only or neither.
TATP, TP or OFF
