Helios FM 20/100 W, user manual– 12/2011
Page 53
Head Office : Parc d’activites Kennedy - 20, avenue Neil Armstrong – F-33700 Bordeaux-Merignac (France)
Tel +33 (0)5 57 928 928 – Fax +33 (0)5 57 928 929 –
www.ecreso.com – [email protected]
NAME
Access
(R/W)
Possible value on the
serial port of the unit
Comments
INPUT.MPX2.SW.PRIO
R/W
0..7 ; 0=disabled
Priority of each audio channel (4= highest priority)
INPUT.AUDIOGEN.STATE R/W
"OFF" or "L" or "R" or "L+R"
or "L-R"
Type of generated MPX signal
INPUT.AUDIOGEN.LEVEL
R/W
-100.00 ~ 12.00
Audio level
INPUT.AUDIOGEN.FREQ
R/W
0 ~ 100000.00
delta phase = freq audio / 200000
INPUT.AUDIOGEN.PREAC
R/W
"0" or "50" or "75"
Sets the value of the pre-emphasis
6.2.6. Encoder commands
NAME
Access
(R/W)
Possible value on the serial port of
the unit
Comments
CODER.MOST R/W
"STEREO" or "MONO" or "MONO_L" or
"MONO_R"
Configuration of the audio on MPX
STEREO; MONO;MONO_L
CODER.CURRENT.AUDIO R
"AUTO" or "LINE1" or "LINE2" or
"TUNER" or "MPX1" or "MPX2" or
"TUNER1" or "TUNER2" or "PLAYER"
or "GENE"
Indicates the channel used by the exciter.
CODER.CURRENT.RDS R
"NONE" or "MPX1" or "MPX2" or
"TUNER1" or "TUNER2" or
"INTERNAL"
Indicates the channel used by the exciter.
CODER.RDS.OPERATION
R/W
"AUTO" or "MANU"
Automatically or manually adds RDS if loss
of RDS in the MPX.
CODER.SELECT.AUDIO R/W
"AUTO" or "LINE1" or "LINE2" or
"TUNER" or "MPX1" or "MPX2" or
"TUNER1" or "TUNER2" or "PLAYER"
or "GENE"
Imposes a specific input.
CODER.SELECT.RDS R/W
"MPX1" or "MPX2" or "TUNER1" or
"TUNER2" or "INTERNAL"
Channel to use
CODER.SELECT.SCA R/W
"MPX1" or "MPX2" or "TUNER1" or
"TUNER2"
Channel to use
CODER.19KOUT.LEVEL R/W
0…8;
0=OFF
Enables/disables and sets the rear panel
19 kHz level output
