13
activated during cold and wet weather conditions. When heater activated,
heat will be trapped inside to warm up the sonic reflection surface, and
alkaline batteries are extremely susceptible to leakage when temperature is
over certain limits.
So Alkaline batteries are forbidden to be used with
this anemometer.
4.2.2
Mount ultrasonic anemometer assembly
4.2.2.1
Before you mount
Before installing your outdoor sensor in the permanent location, we
recommend operating the device for one week in a temporary location with
easy access. This will allow you to check out all of the functions, insure
proper operation and familiarize you with the weather station and calibration
procedures.
4.2.2.2
Mounting
You can attach a pole(not included) to a permanent structure and then
attach the sensor package to it (see Figure 6-10).
The U-Bolts will accommodate a pole diameter of 1.25-2 inches (pole
not included).
1.
Install the base on a pole (1.25inch~2inch) as Figure 6.
Figure 6: Sensor package mounting diagram 5-1
Summary of Contents for GW1003
Page 33: ...33 Dashboard Graph display ...
Page 34: ...34 List display Weather Map ...
