ECOWITT GW1003, Operation Manual

Page: 43 / 53

43
5.7 Device Settings
On the Live Data page, press “More” on the top-right, and select “Device
Settings” to set the following:

Select sensor type.

Set time zone.

Reboot Device.

Reset to Factory Settings.

Firmware upgrade (only display when new firmware is available)
Note: While a new firmware is available, a notification will pop-out when
you selecting your device on the Device List.
5.8 Sensor ID
On Live Data page, press More and select “Sensors ID” to set the following:

View sensor ID, signal strength and battery power condition. 1-4 bars
means 1-4 successful successive signal receptions without missed ones.

Register the sensor when offline.

Enable or disable the sensor.

Input the Sensor ID when offline.
5.9 Viewing data on wunderground.com
You can also observe your weather station’s data by using the
wunderground.com web site. You will use a URL like this one, where your
station ID replaces the text “STATIONID”.
http://www.wunderground.com/personal-weather-
station/dashboard?ID=STATIONID
It will show a page such as this, where you can look at today’s data and
historical data as well.