33
for each power PID regulator output. Maximum number of steps
is 1024.
NOTE: If the flue gases temperature is below PAR58 [⁰C] in FAN2
for Room Heating mode, FAN2 is switched off.
35
Power 2 Fan 2 Speed
FAN2 speed at power 2:
NOTE: Not used when advanced regulation is selected.
NOTE: If the flue gases temperature is below PAR58 [⁰C] in FAN2
for Room Heating mode, FAN2 is switched off.
36
Power 3 Fan 2 Speed
FAN2 speed at power 3:
NOTE: Not used when advanced regulation is selected.
NOTE: If the flue gases temperature is below PAR58 [⁰C] in FAN2
for Room Heating mode, FAN2 is switched off.
37
Power 4 Fan 2 Speed
FAN2 speed at power 4:
NOTE: Not used when advanced regulation is selected.
NOTE: If the flue gases temperature is below PAR58 [⁰C] in FAN2
for Room Heating mode, FAN2 is switched off.
38
Power 5 Fan 2 Speed
FAN2 speed at power 5:
Normal regulation
– defines the FAN2 speed at power 5
(depends on the selected fan mode – Fan 2 for Room Heating,
Fan 2 As Chimney, or Fan 2 As Chimney used in closed pressure
loop).
Advanced regulation
– defines the MAXIMUM allowed FAN2
speed for the PID regulator. Controller calculates the FAN2 speed
for each power PID regulator output. Maximum number of steps
is 1024.
NOTE: If the flue gases temperature is below PAR58 [⁰C] in FAN2
for Room Heating mode, FAN2 is switched off.
39
Quickheat Fan 2 Speed
FAN2 speed at Quickheat power:
Defines the FAN2 speed at Quickheat power in FAN2 for Room
Heating mode.
NOTE: If the flue gases temperature is below PAR58 [⁰C] in FAN2
for Room Heating mode, FAN2 is switched off.
Fan 3
FAN3 is used to heat up external room with a separate fan or a separate damper for air flow
redirection.
Downloaded from
www.Manualslib.com
manuals search engine
