ecom-B
Page 17
For determination of the two temperatures
the T-Room probe is used (waterproof
version).
Storage of the measurement values (after
getting stable) is done by the key
<store>
.
By using the curser
<down>
it can be
scrolled to the next measurement
“Temp
free”
. Here is the option for another tem-
perature measurement.
After storing the temperatures the CO-
measurements are next. By pressing the
curser
<down>
a 1-minute calibration cycle
starts for flashing the sensors with fresh
air. During calibration cycle the probe must
not be positioned in the combustion tube.
After calibration cycle the CO-content of
the surrounding air can be determined. Use
the probe to check the area around the
boiler. Beside the stored value (press key
<store>
) the instrument stores the maxi-
mum CO-value of the measurement.
Next point of the routine (curser key
<down>
) is the CO-value in the combus-
tion tube of the boiler which is determined.
For measurement the probe must be posi-
tioned in the combustion tube. Apart from
the stored value the maximum CO-value of
the measurement is stored.
Atmosph. boiler
CO ambient
6
ppm
Val.:
6
ppm
CO max: 9 ppm
Atmosph. boiler
CO flue gas
21
ppm
Val.:
21
ppm
CO max: 26 ppm
Atmosph. boiler
W. Temp. warm
48
°C
Val.:
48
°C
Continue with :
↑↓
Atmosph. boiler
Difference
26
°C
Continue with :
↑↓
Atmosph. boiler
Temp. free
34
°C
Val.:
34
°C
Continue with :
↑↓
Summary of Contents for B
Page 1: ...Operating Instructions ...
