ecom-B
Page 7
2. Switch on Instrument
After switch on the instrument (press
<I/0>
)
the main menu appears on the display.
There will be displayed sub-menus with
following functions (not visible sub-menus
could be displayed by scrolling with arrow
keys):
Comb. measure.
: operate combustion measurement
(Mean value
: operate mean value measurement)*
(Atmospheric boiler : operate routine for atmospheric boilers)*
(Fan burner
: operate routine for fan burners)*
(Diagnostic gas
: operate routine for gas fireplaces)*
(Pressure tests
: pressure tests according to TRGI)*
(Data processing : assign measurements / Data transfer)*
Adjustments
: change adjustments of instrument
Control
: check operating status of instrument (* = Option)
To perform measurements, select with the cursor keys the sub-menu
"Gas analysis"
and confirm with
<Enter>
. The instruments starts
then a 1- minute calibration phase and the fuel types selection list is
displayed. The following fuel types acc. to 1
st
BImSchV are available:
Fuel oil (B)
Natural gas (B)
City gas (B)
Coke oven gas (B)
Liquid gas (B)
Use the cursor keys to select the desired
fuel type and confirm with
<Enter>
. The
instrument will then enquire if you wish to
use the data bank (only with option „Data
processing“).If you want to assign the
sampled data to a specific plant, so choose
„YES“
with the cursor keys and confirm
with
<Enter>
. (
„NO“
= measurement will
be performed without assignment).
Comb.measure.
Mean value
Atmosph. boiler
Burn. w. blower
Diagnosis gas
Pressure tests
Data processing
Adjustment
Control
Type of fuel
Fuel oil (B)
CO2max : 15.4
A1-fact. : 0.50
Select with
↑↓
Data processing
NO
Are you sure?
Continue with :
↑↓
↵
↵↵
↵
Summary of Contents for B
Page 1: ...Operating Instructions ...
