417102012_LMI02.doc
- 84 -
Rev. 9-07.08
7.4.6
Assignment of metering enable
If the metering enable should also be active during the pre-metering, the menu ENABLE
ALSO ON PREMETERING must be set to
YES
in the CONFIGURATION FUNCTION (set
to NO ex-works)
To select the
assignment for metering enable
,
proceed as follows:
1. Activate the CONFIGURATION FUNCTIONS menu.
2. Press the
↵
key.
3. Scroll with the NEXT key until the next menu is displayed.
4. Switch over from NO to YES by pressing one of the or keys.
5. Press the NEXT key to confirm.
7.4.7
Activate separate pre-metering output
If an additional relay output is required for activating a pre-metering pump, this must be
activated by selecting
YES
under PREMETERING OUT SEPARATE in the
CONFIGURATION FUNCTIONS menu (ex-works setting is NO).
This means the relay output will be activated with the output SP1 during the pre-metering.
To select the
separate pre-metering output
,
proceed as follows:
1. Activate the CONFIGURATION FUNCTIONS menu.
2. Press the
↵
key.
3. Scroll with the NEXT key until the next menu is displayed.
4. Switch over from NO to YES by pressing one of the or keys.
5. Press the NEXT key to confirm.
Summary of Contents for LMI 02
