ECOFOREST Cantina Super, Installation And Maintenance Manual

Page: 220 / 263

219
This process takes 20 seconds to validate; during that time, it is possible to
start the boiler again by pressing the On button (
X
).
Once this time passed, it is necessary to wait until the boiler gets completely
cold before turning it on again; that is, about 20 minutes.
When the boiler is completely cold, it displays the initial screen.
In any case, it is not convenient to turn the boiler on and off repetitively as power and pellets consumption
increase according to the minimum operation of the boiler, controlled by the temperature probe. It is recommended
not to turn it on more than twice/day.
4. MENU 1, LANGUAGE SELECTION, CLOCK SETTING AND PROGRAMMATIONS.
When the boiler is connected, the information of language, date and time as programmed at manufacturing
are displayed depending on the country and have to be changed and adapted.
Press the MENU button (
Z
) you will enter in water temperature and pressure, only in water models. In air
models you will enter in the next step Menu 1-User programme.
If you press the MENU ( Z ) button again, you will see the MENÚ 1 :
If you press the MENU ( Z ) button again, you will see the following:
Press MENU (
Z
).
If you press the MENU button (
Z
) the languages are progressively displayed:
SPANISH, DANISH, PORTUGUESE, ENGLISH, ITALIAN, GERMAN, FRENCH and
DUCH. In order to selected the desired language, press the MENU button (
Z )
and to exit, press the ON button ( X
)
.
In order to exit the language selection menu, press the ON button ( X
)
and you will reach the main screen. If
you wish to change the date and time displayed, press the MENU button ( Z ) and the following appears:
Back to MENU (
Z
) you reach:
Press the increase button ( V
)
and you reach:
Press MENU (
Z
)
and you reach time setting:
Turn stove off
>>>>>>>>>>>>>>>>>
TURNING OFF
*****************
ECOFOREST 18 °C
22:10 Friday 1
t °C Water. 20 °C
Pressure 1.2 bar
MENU 1
User program
1-0
Select language
Select language
ENGLISH
MENU 1
User Programme
1-0
Select language
1-1
Clock programing