Eco GA Series, Installation, Operation & Maintenance Manual, Page: 28 / 59

28
14. PUMP TO MOTOR ASSEMBLY
INSTRUCTIONS
Instruction
1. Position pump shaft flat directly over coupling setscrew access
2. Setscrew coupling half, flush to end of motor shaft, assemble spider and other
coupling half to motor half (optional, wrap coupling jaws and spider with masking
tape)
3. Slide shaft of pump assembly into coupling mounted on motor, fasten pump adaptor
to motor with bolts provided
4. By using coupling access in the pump adaptor, tighten the remaining setscrew on
coupling to pump shaft
NOTE: This product may be assembled in more than one way, but we have determined
this procedure to the most time efficient.