
2
ECO
®
FACTORY SERVICE POLICY
Should you experience a problem with your
ECO
pump, first consult the troubleshooting guide in your
operation and maintenance manual. If the problem is not covered or cannot be solved, please contact your
local Pulsafeeder Sales Representative, or our Technical Services Department for further assistance.
Trained technicians are available to diagnose your problem and arrange a solution. Solutions may include
purchase of replacement parts or returning the unit to the factory for inspection and repair. All returns require
a Return Authorization number to be issued by Pulsafeeder. Parts purchased to correct a warranty issue
may be credited after an examination of original parts by Pulsafeeder. Warranty parts returned as defective
which test good will be sent back freight collect. No credit will be issued on any replacement electronic parts.
Any modifications or out-of-warranty repairs will be subject to bench fees and costs associated with
replacement parts.
TRADEMARKS
ECO® is a registered trademark of Pulsafeeder, Inc.
Pulsafeeder® is a registered trademark of Pulsafeeder, Inc.
SAFETY CONSIDERATIONS:
•
Read and understand all related instructions and documentation before attempting to install or maintain
this equipment
•
Observe all special instructions, notes, and cautions.
•
Act with care and exercise good common sense and judgment during all installation, adjustment, and
maintenance procedures.
•
Ensure that all safety and work procedures and standards that are applicable to your company and
facility are followed during the installation, maintenance, and operation of this equipment.
Copyright ©2020 Pulsafeeder, Inc. All rights reserved.
Information in this document is subject to change without notice. No part of this publication may
be reproduced, stored in a retrieval system or transmitted in any form or any means electronic
or mechanical, including photocopying and recording for any purpose other than the purchaser’s
personal use without the written permission of Pulsafeeder, Inc.
Summary of Contents for GA Series
