Eco Range 15/21, Instructions For Use Installation And Servicing

Page: 17 / 35

Note: 28 sec fuel must only be used on ECO Range Cookers & boilers
SERVICING INSTRUCTIONS
A competent service engineer OFTEC registered should be appointed on an annual basis.

Remove inspection door, burner and baffle assembly

Brush down the inside of the heat exchanger and vacuum out debris

Clean baffle assembly

Pull out inserts from stainless steel heat exchanger and clean before replacing.
Ensure stainless steel heat exchanger is thoroughly cleaned.

Empty and clean condensing trap (Fig.4)

Inspect and clean burner assembly, and replace with new nozzle (see burner manual)

Renew any insulation e.g. inspection door or inside base of heat exchanger

Reassemble baffles and replace inspection door.

Replace paper oil filters

Test oil pressure and test combustion.