ENGLISH
Instruction manual CASA SPECIALE
9
5
Unscrew the upper grinding blade and remove it from the grinder body. Remove coffee residues with
vacuum cleaner and cleaning brush.
6
Reassemble the grinder.
7
Reconnect the power cord of the grinder
9
Trouble-shooting
If a coffee bean is stuck between the blades of the grinder, this problem can be easily solved.
1
Disconnect the power cord to interrupt the current entry. Make sure that children are out of reach.
2
Take out the bean hopper and remove (with the vacuum cleaner) the remaining coffee beans from the crushing
mill.
3
Loosen the upper grinding blade by turning it counter-clockwise (approx. 2 rotations).
4
Reconnect the power cord and switch on the grinder. (Do not reach into the crushing mill.) The crushing mill
operates again.
5
Switch off the grinder again and disconnect the power cord to interrupt the current entry.
6
Now turn back the upper grinding blade clockwise (approx. 2 rotations).
7
Reconnect the power cord, switch on the grinder and replace the bean hopper. The crushing mill of the grinder
operates again.
Problem
Possible Cause
Trouble-shooting
The grinding degree is not fine
enough
Use a finer grinding degree.
Tamp the ground coffee more firmly.
The coffee mixture is too old.
Use fresh coffee
The coffee amount is too small.
Use an adequate amount of coffee.
Little or no crema on the top of the
coffee
Change of weather effects and
humidity
Adapt the grinding degree to the
conditions.
The grinding is too fine.
Increase the grinding degree.
Tamp the ground coffee only
slightly.
Sparse coffee dispensing, only drop
by drop
There is too much ground coffee.
Use approx. 7 g of coffee for every
cup.
The grinding degree is not fine
enough.
Reduce the grinding degree.
The coffee is old.
Use fresh coffee.
The amount of ground coffee is not
enough.
Use an adequate amount of coffee.
Weak “body”
The net filter is dirty.
Clean the net filter.
The coffee mixture is improper
Use another coffee mixture
Foam instead of crema
The grinding degree of the coffee
grinder is not suited for the coffee
mixture in use
Adjust the coffee grinder (When
changing the coffee mixture,
changing the grinding degree can
also be necessary)
10 CE Conformity
Conformity
This product complies with the following directives:
EN291, EN292, EN 60204, DIN 45635 subject to 98/27/CEE
