Instruction Manual MM850481 ed. 03a
45
9 CONFIGURATION
Many parameters can be modified using the instrument keyboard. Pressing the [
SETUP
] key, you can change the current
fuel, include or exclude the CO cell, change the technical unit, set the alarms, etc. The
CONFIGURATION
P1
--- FUEL ---
> LPG
CO SENS. Includ.
FUEL PARAMETER
ESCAPE
–
NEXT
press
[
NEXT
] to change menu page
CONFIGURATION
PAG2
ENGENEER UNITS
ALARMS
O
2
REFERENCES
Dilution AUTO
ESCAPE
–
NEXT
Use
the
[
S
] and [
T
] keys to move the cursor symbol to the desired option.
Press the [
ENTER
] key to select the option.
Press
[
ESCAPE
] (F1) to return to the previous menu.
Fuel
You can select between the pre-set fuel table (LPG, Diesel oil, Oil, Natural gas) or, if
programmed using the configuration PC software, 6 customizable.
CO cell
If the CO electro-valve option is installed, you can Include, exclude or automatically select (using
the PC configuration software, you can program the CO level for automatic exclusion) the CO
cell.
Fuel Parameters
You can display only all the constant table for the selected fuel. To change the values, you
should use the configuration PC software.
Engineering Unit
You can change the technical units for gas, temperature and pressure measurements.
Alarms
You can set the alarms levels, Min/Max operation and enable/disable all the 4 possible acoustic
and visible alarms.
%O2 references
You can set the %O2 for CO measurements and %O2 for other gas.
CO Dilution
Toggle from the AUTO, ON, and OFF dilution status pressing the [ENTER] key
9.1 Engineering
Units
When you select the Engineering unit option, the following page will be displayed:
MEASURING UNITS
> CO
ppm
Other
ppm
Temp.
°C
Press.
mmH2O
ESCAPE
–
Use
the
[
S
] and [
T
] keys to move the cursor symbol to the desired option.
Press the [
ENTER
] key to change the value.
