Instruction Manual MM850481 ed. 03a
23
CO Reference
0.0
ESCAPE
–
The “
S
” symbol below the first digit is the cursor.
You can move the cursor between the digit using the [
W
] and [
X
] keys.
You can change the selected digit using [
S
] and [
T
]. If “9” or “0” values are exceeded, the left digit is increased or decrease.
Press [
ENTER
] to memory store the value and return to the previous page.
Press [
ESCAPE
] (
F1
) to return to the previous page without save the changes.
7.1.4 Text
input
If you have to set a text parameter (e.g. customer name, etc.) use the following procedure:
Select the parameter to be changed (e.g. customer name) with the [
S
] and [
T
] key from the configuring menu.
Press [
ENTER
] to enter in modify page as follows:
!"#$%&'()*+,-./0123
456789:;<=>?@ABCDEFG
HIJKLMNOPQRSTUVWXYZ
CONFIRM
ESCAPE
–
C
A “
S
” symbol below the “ “ (blank) character in figure, represent the cursor. It is used to identify the selected character; you
can move it using the [
W
], [
X
], [
S
] and [
T
] keys. The box below the characters table shows the currently inserted text. The
symbol “
W
” is the end of line symbol.
Press [
CONFIRM
] to write in the line box the selected char. The reversed char “
C
”, when selected, delete the last inserted
char.
Press [
ENTER
] to memory store the text and return to the previous page.
Press [
ESCAPE
] to return to the previous page without save the changes.
7.1.5
Select by a list
If you have to set a text parameter (e.g. Tag name, fuel type, etc.) use the following procedure:
Select the parameter to be changed (e.g. fuel type) with the [
S
] and [
T
] key from the configuring menu.
Press [
ENTER
] to enter in modify page as follows:
-- Fuel --
Natural Gas
LPG
Gasoil
Combustible oil
ESCAPE
–
The “
X
” symbol on the left is the cursor.
You can move the cursor between the digit using the [
S
] and [
T
] keys.
Press [
ENTER
] to memory store the selection and return to the previous page.
Press [
ESCAPE
] (
F1
) to return to the previous page without save the changes.
