Instruction Manual MM850481 ed. 03a
19
6.3.1.1
Installing the USB driver
x
Close all the active windows and/or applications.
x
If you computer runs in Windows™XP or Windows™ XP SP1, temporally disconnect the PC from the web. To do this,
temporally remove the network cable from your pc, if connected, or by disabling your network card going to the “Control
Panel \ Network and Dial-Up Connections”, right-clicking on the appropriate connection and selecting “Disable” from the
menu. The connection can be re-enabled after the correct driver installation. This it’s not necessary if your computer runs
Window™ XP SP2 if configured to ask before connecting to Windows Update. Windows™ XP SP2 can have this
parameter already set, and to verify this open the Control Panel, select “System”, select the Hardware tab and click
“Windows Update”. Please verify that this option is DISABLED.
x
Connect the instrument to a USB port of your computer. This will automatically run the “Windows Found New Hardware
Wizard”, if the adaptor is not automatically identified and installed on your system.
x
The following page will be displayed:
x
Select “No, not this time” to avoid the driver search in internet, then click “Next” to proceed with the installation
