16
Receivers ID Group:
After changing the ID Group, please remember to validate the selection by pressing the
“Submit” button on the Transmitter webpage or the “Update” button on the Receiver
webpage.
Transmitter and Receiver RS-232 baud rate
VEO-XTI1C and VEO-XRI1C provide full-duplex RS-232 pass-through from TX to RX or
from RX to TX allowing the control of third party devices.
The communication will work properly when baud rate and data settings of Transmitter,
Receiver and third party RS232 devices are the same.
The default baud rate of Transmitter and Receiver is 2400 but it can be changed
through web page by selecting the desired value from 2400 to 115200 bps.
The RS-232 pass-through works only when the same ID Group is selected.
8.3. Group ID Selection via Telnet
The ID group can also be selected by opening a Telnet session with a standard Telnet
terminal, using the port 9999.
When the session is open, send the command
set_group_id
n
(where
n
is the number
of the desired ID Group) followed by the carriage return and line feed (\r\n).
Example:
set_group_id 1
Group ID 01
set_group id 63
Group ID 63
