15
8.1.2. Baud Rate
The remote control can be used to change RS-232 baud rate.
Press button
①
to switch between Group ID and baud rate function
When the baud rate function (F0-F7) is shown, press “+” or “–” to select the
desired communication speed:
o
F0 = 2400 (default)
o
F1 = 4800
o
F2 = 9600
o
F3 = 19200
o
F4 = 28800
o
F5 = 38400
o
F6 = 57600
o
F7 = 115200
8.1.3. Special Functions
Pressing the
②
button for more than 3 seconds, will allow to factory reset the VEO
devices. The LED display will start blinking and when it shows “00”, the factory reset is
successfully completed.
8.2. Group ID and RS-232 baud rate Selection via Web Browser
When PC is connected to the same network as the VEO devices and it is in the same
domain, the Group ID number of each device can be selected using the web page as
well as RS-232 baud rate. To access the web page, just type the device IP address in
your internet browser. The default credentials are:
User name:
admin
Password
:
admin
Transmitters ID Group:
