Illustrations are typical and may not match exact vehicle details
email - [email protected]
tel - 1-800-477-2267
12
Illustrations are typical and may not match exact vehicle details
email - [email protected]
tel - 1-800-477-2267
Cable Routing
Step 1
Route the factory mirror wire harness and
clip back into place. Plug in mirror connec-
tors at the door module. Route and secure
the camera cable to the mirror harness.
Step 2
Unsnap the vehicle side of the door grom-
met (2a). Remove 2 x T20 Torx on the door
side of the grommet (2b).
Step 3
Passenger Door (RH):
Using a cable tie or
similar wire feeder, feed the BSM1-SCEH
70” Camera Connection Harness through
the door grommet. Route camera cable
through plastic channel and connect to
camera connector.
2
PLEASE NOTE
The Camera Connection Harness has two different
ends. Make sure you feed the correct end into the
door. When connecting the harness to the camera
cable make sure it is lined up correctly.
FCTP-DR1304
Lane Change Assistance - RAM Truck
2a
2b
