7
Illustrations are typical and may not match exact vehicle details
email - [email protected]
tel - 1-800-477-2267
Illustrations are typical and may not match exact vehicle details
email - [email protected]
tel - 1-800-477-2267
Door Panel & Mirror Removal - (cont)
Remove 6 x T20 Torx around perimeter of
door panel. Note: These are plastic 2-part
fasteners. Use a hand tool and light pres-
sure to remove. The clip part of the fastener
will stay in the door. Use a nylon panel tool
or similar to remove the clips. Once all the
clips are removed, pull straight up on the
door panel to release.
Step 5
Unclip the mirror wire harness and unplug
connectors.
Step 6
FCTP-DR1304
Lane Change Assistance - RAM Truck
Remove the bottom two 10mm nuts se-
curing the side mirror. Loosen the top nut,
but do not remove. From the outside of the
truck, hold the mirror securely, and then
reach through window and remove the top
10mm bolt. Pull straight out on mirror to
release exterior clip. Pull harness carefully
out of door.
Step 7
