Illustrations are typical and may not match exact vehicle details
email - [email protected]
tel - 1-800-477-2267
10
Illustrations are typical and may not match exact vehicle details
email - [email protected]
tel - 1-800-477-2267
Camera & Mirror Assembly
Determine the correct new side camera
cap (LH or RH) and snap the turn signal
indicator into place (1a). Insert a SVC-02
side camera into the cap (1b).
Route a long cable tie or similar through
the mirror assembly starting at the top.
Attach the small DIN side of the camera
cable with tape and draw it through.
Step 1
Step 2
Step 3
Route the camera cable through the mirror
frame following the same path as the turn
signal wiring. Connect camera cable to
camera. Reinstall foam on mounting plate.
PLEASE NOTE
The camera can only be installed by aligning the flat
edge against the flat edge of the insert.
Do not apply pressure directly on the camera lens.
FCTP-DR1304
Lane Change Assistance - RAM Truck
1a
1b
