
24
CS-670
AREA
MAINTENANCE
PAGE
Air Filter
Clean
•
Replace
19
•
Fuel Filter
Clean
Replace
20
•
Spark Plug
Clean
•
Replace
19
•
Carburetor
Check/Rebuild
•
Replace
18
1
•
Cooling System
Inspect/Clean
19
•
Muffler
Inspect/Clean
-
•
Oil Filter
Inspect/Replace
20
•
Sprocket
Inspect/Replace
21
•
Starter Rope
Inspect/Replace
-
•
Guide Bar
Inspect/Clean
21
•
Fuel System
Inspect
19
•
Screws, Bolts & Nuts Inspect, Tighten/Replace
•
Choke System
Check
11
•
Ignition System
Clean/Replace
NO MAINTENANCE REQUIRED FOR COIL AND FLYWHEEL
IMPORTANT
Time intervals shown are maximum.
Actual use and your experience will determine
the frequency of required maintenance.
Replacement will be required for commercial
use after 600 hours.
For consumer use, cleaning every 6 months is
required.
Cleaning includes Rebuild kits.
Every year or
600 Hours use
Daily or every
4 Hours use
With Each
Re-Fueling
Before use
Monthly
Every Three Months
or 100 Hours use
Six Months or
300 Hours use
1
SERVICE GUIDE
Plug
Air cleaner cover
WINTER KIT
Use the winter kit with chain saw to prevent a
carburetor’s trouble in winter season.
Installation of the kit is as follows.
• AIR CLEANER COVER - Remove air cleaner
cover. Remove plug located inside of cover front
and put the plug into another grooved position as
shown in the illustration and mount cover so as
to allow warm air to flow in from front.
NOTE
For operation at normal temperature return the
plug to its original place.
It causes over heating of the engine.