4
6 INCH CHIPPER
SAFETY
1.9 SAFETY DECALS
Keep hands and feet out of inlet and discharge
openings while machine is operating to avoid serious
personal injury. Stop and allow machine to come to a
complete stop before clearing obstructions.
Read and understand this owner/operators
manual. Be completely familiar with the
controls and the proper use of this equipment
Obtain and wear safety glasses and use
hearing protection at all times when operating
this machine.
Before inspecting or servicing any part of this
machine, shut off power source, remove the
key, disconnect spark plug wire from spark
plug and make sure all moving parts have
come to a complete stop.
Do not operate this equipment in the vicinity
of bystanders. Do not allow children to
operate this equipment. Always stand clear
of discharge area when operating this
machine. Keep face and body away from discharge areas.
Do not operate machine without shields in place.
Failure to do so may cause serious injury or
death.
Check blade bolts for proper torque
after every 8 hours of operation. Check
blades and rotate or resharpen daily or as
required to keep blades sharp. Refer to owners manual for instructions.
Failure to do so may cause poor performance, damage or personal
injury and will void the machine warranty.
See Section 1.10 for decal locations. Familiarize yourself with all of the safety and operating decals on the machine
and the associated hazards. See the engine owner’s manual or contact the engine manufacturer for engine safety
instructions and decals.
PN 12174
Keep hands and feet out of inlet and
discharge openings while machine is
operating to avoid serious personal
injury. Stop and allow machine to come
to a complete stop before clearing obstructions.
1
2
6
3
4
5
PN 12169
PN 12172
PN 12173
PN 12174
PN 12175
PN 12250
Read and understand your owners manual before operating. If owners
manual was not included or you have any questions, please call
800.247.7335 or 701.282.5520 (U.S.A.).
Do not operate this equipment in the vicinity
of bystanders. Do not allow children to
operate this equipment. Always stand clear
of discharge area when operating this
machine. Keep face and body away from
discharge areas. Rotate the discharge tube over the hitch before towing
and lock securely in place.
7
10
9
PN 14942-00
PN 32109-00
PN 30321-00
Feed roller support must be secured in
the up position prior to servicing chipper
feed area. Feed roller can fall and cause severe bodily harm. Consult
owners manual for proper method of securing feed roller support. Lower
feed roller before operating chipper.
8
PN 18983-00
