eCapture eyesmap, User Manual

Page: 139 / 195

7 Practical cases
User Manual 139
7.1.2. Orientation with Targets.
If you wish to take measurements of areas with a very homogeneous texture like walls
of a single colour, plastic or glass objects, etc., the best option is to use targets for
orientation.
In this practical case, measurements will be taken and coordinates will be calculated
on a façade of a single colour, where it is not possible to use automatic orientation
and doing it manually would be too complicated because of the absence of clearly
identifiable points in the entire photograph.
1. In the main menu, you can select any of the three point-to-point buttons: the
coordinate button, the distance button or the area button. For your convenience,
as measurements are going to be taken, click on the “
Distance
” button so that
the correct option is directly selected.
2. The
“
photograph capture and management
”
screen will appear in which the first
step consists of selecting the image capture or load mode. The option chosen
in this practical case is
“
Stereo Camera
.”
3. After selecting the stereo capture mode, the cameras are activated and the
images can be taken with the "capture" button (a red button with a camera
icon). In this case, 3 pairs are captured (6 photos) in line (notice the thumbnails
in the gallery at the bottom of the screen).