31-7-2014 60 ebode IPV58P2P
Figure 6.69
Figure 6.70
CAUTION:
If your camera works well with the current firmware, we recommend not
upgrading. Please don’t upgrade the firmware unnecessarily. Your camera may be
damaged if misconfigured during an upgrade.
NOTE:
1) Don’t upgrade the firmware through the web UI in WAN, or else the upgrade may fail.
2) Please ensure you have download the correct firmware package for your camera
before upgrading. Read the upgrade documentation (readme.txt file) in the upgrade
package before you upgrade.
3) Upon downloading the firmware check the sizes of the .bin files. They must match the
size in the readme.txt file. If not, please download the firmware again until the sizes are
the same. Your camera will not function correctly if a corrupt .bin file is used.
4) Normally, only Device WEB UI need to be upgrade, please do not try to upgrade the
Device Firmware.
5) Never shut down the power of the camera during upgrade until the IP camera restart
and get connected.
6) After upgrade successfully, please clear the cache of browser, uninstall the old plugin
and re-install it, then reset the camera to the default factory settings before using the
camera.
Enter the
User name
and
password