31-7-2014 34 ebode IPV58P2P
6.3 Network
This section will allow you to configure your camera’s IP, PPOE, DDNS, Wireless Settings,
UPnP, Port, Mail Settings and FTP Settings.
6.3.1 IP Configuration
If you want to set a static IP for the camera, please go to IP Configuration page. Keep
the camera in the same subnet of your router or computer.
Figure 6.20
Changing settings here is the same as using the IP Camera Tool. (Figure 4.23/4.24)
It is recommended that you use the subnet mask, gateway and DNS server from your
locally attached PC. If you don’t know the subnet mask, gateway and DNS server, you
can check your computer’s local area connection as follows: Control Panel--Network
Connections--Local Area Connections --Choose Support--Details.
Figure 6.21