31-7-2014 58 ebode IPV58P2P
6.7.2 RS485 Configuration
This camera supports the standard 485 cradle head protocol (PELCO-D and PELCO-P).
Please configure the RS485 protocol corresponding information first, or else the cradle
head may cannot work.
Figure 6.65
6.8 Firewall
This section explains how to control the access permission by checking the client PC’s IP
addresses. It is composed of the following columns: Block access from these IP
addresses and Only allow access from these IP addresses.
Figure 6.66
Enable firewall, If you select Only allow access from these IP addresses and fill in 8 IP
addresses at most, only those clients whose IP addresses listed in the Only allow access
from these IP addresses can access the Network Camera. If you select Block access from
these IP addresses, only those clients whose IP addresses are in the IP list cannot access
the Network Camera.
Click Save to take effect.