If the electric wheelbarrow has any malfunction please follow the steps as described below.
All repair works has to be done only by authorised Service centers.
Incorrect handling, service or repair could can damages on electric system, mechanical parts, motor and
gear system at the electric wheelbarrow.
Electric wheelbarrow switched ON,
Automatic switch OFF has been
Switch OFF at ignition key and switch
but no function
activated
ON after 3 seconds wait
Battery low
Load battery
> Battery low after charging
Make sure mainswitch at battery
charger is at position ON
> Still no function
Battery charger damaged (Replace)
Capacity of battery is low
Replace battery
Pressure in tyres not correct
Refill tyre pressure
-> high energy consumption
(Front + rear 2bar)
Cable damaged to ignition key
Replace cable
Cable damaged to charger plug
Replace cable
Motor is working (motor sound can
Connect motor
heard), but no function
Motor has switched OFF during work
Switch OFF at ignition key
(Thermical fuse has activated)
> Furthermore no function
Wait until electric system has cooled
(Overheating of electronic system)
down
Battery fully loaded,
Thumb lever damaged
Replace
but no function
Electronic controller damaged
Replace, bring to service center
Damage of any cable
Replace
Any Cable connection (plugs)
Check cable connection and replace
has faulty connection
damaged parts, bring to service center
Wheelbarrow is difficult to handle
Pressure in tyres not correct
Refill tyre pressure
and drives twitchy
(Front + rear 2bar)
Bearing at caster wheel or
Replace bearing or complte
front wheel damaged
caster wheel
