Q3
PL
30
www.eberg.eu
7. CLEANING AND MAINTENANCE
•
Before starting cleaning and maintenance, disconnect the device from the power source, disconnect
the plug from the socket.
•
It is recommended to use a soft damp cloth and neutral detergent for cleaning. Do not use abrasive
cloths or appliances or cleaning agents that could damage the casing of the appliance.
•
Do not pour water on or immerse the device in water or other liquids.
•
Check that the hot air outlet and air inlet are free of dust and dirt.
•
When cleaning, be especially careful not to touch the heating elements.
•
In the event of failure and / or malfunction of the device, disconnect it from the power supply and
contact an authorized service center.
ATTENTION! As a result of continuous development works, the appearance and specification of the
product may slightly differ from the device shown on the packaging.
8. UTILIZATION
INFORMATION ON CORRECT DISPOSAL OF THE PRODUCT IN ACCORDANCE WITH THE EUROPEAN
DIRECTIVE 2012/19 / EU
PAfter end of device life, the device must not be disposed of with household waste. We pay
particular attention to the key role of the consumer in the recycling of this type of waste. The
device must be disposed of at a waste disposal center. Sorting waste such as old electrical
and electronic equipment prevents negative consequences for the environment and human
health which could result from inappropriate disposal of such waste. Sorting such waste allows the
materials from which these devices are made to be recovered, resulting in significant energy and resource
savings. Such disposal requirements are marked with the label of the crossed waste container placed on
the device.
