Q3
EN
25
www.eberg.eu
P1
Default
mode (see
details
in the
operating
mode table)
Press the button
, P1 will appear on the LED
display, then press OK to select program P1. If you do
not confirm your selection with the OK button within
10 seconds, the program will not be activated.
P2
Press the button
, P2 will appear on the LED
display, then press OK to select program P2. If you do
not confirm your selection with the OK button within
10 seconds, the program will not be activated.
P3
Press the button
, P3 will appear on the LED
display, then press OK to select program P3. If you do
not confirm your selection with the OK button within
10 seconds, the program will not be activated.
P4
Press the button
, P4 will appear on the LED
display, then press OK to select program P4. If you do
not confirm your selection with the OK button within
10 seconds, the program will not be activated.
P5
Press the button
, P5 will appear on the LED
display, then press OK to select program P5. If you do
not confirm your selection with the OK button within
10 seconds, the program will not be activated.
P6
Program
for self-
programing
Press the button
, the LED display will show
P6, then press OK to select program P6. P6 is a self-
programmable program.
If you do not confirm your selection with the OK
button within 10 seconds, the program will not be
activated. After confirming the program P6, the LED
display will show 1, using the "+" or "-" buttons, set
the day of the week from 1 to 7, which corresponds
to Monday to Sunday.
Digit „1” is
flashing on the
display – means
Monday
Press OK
Work settings for
Monday:
1. The LED display
will show "00",
use the "+" or "-,"
buttons to set the
start time from 0h
to 24h, then press
OK to confirm. The
