31
Example: You want snow melting to be deactivated between 22:00 and
04:00 and between 11:00 and 15:00 every day, i.e. the installation shall be
active between 04:00–11:00 and 15:00–22:00. First select
WEEK
and then
2
EVENTS
. The first event is
ON
at 04:00 and
OFF
at 11:00. The second event is
ON
at 15:00 and
OFF
at 22:00.
RESET
There is also a reset function, which resets the program to the factory set-
ting, Max +2 °C and Min -10 °C, and deletes all the set events.
System setting menu
SYSTEM
Under system settings, you will find settings for, for example, language and
date, as well as resetting functions for the time counter and for complete
resetting to factory settings. The system settings are under
SYSTEM
in the
MAIN MENU
.
Language
LANGUAGE
You can choose between several languages; the factory setting is English.
Set the required language by scrolling through them using the or but-
ton and confirm with .
You can also use the shortcut in the display mode (press for three sec-
onds). Then go directly to the language menu. A practical function if you,
by mistake, set the wrong language and then have difficulty finding the lan-
guage menu again.
Date and time
DATE/TIME
A set time and date can be changed if needed, for example, if the electrical
supply to the thermostat was disrupted for a period of more than fifty hours.
The setting function then comes up automatically.
The date and time setting is in the
MAIN MENU
under
SYSTEM
and
DATE/TIME
.
Change the value that blinks with either or and confirm with .
Summer and winter time
S/W TIME
The thermostat calendar and clock are automatically set to summer and
winter time but the function can, if it is not required, be switched off.
Summer and winter settings are in the
MAIN MENU
under
SYSTEM
; select
S/W
TIME
. Switch off the function under
ON/OFF
in the menu and select
OFF
, a
message is shown for a short time confirming that the function is switched
off. Activate the function in the opposite way by selecting
ON
.
Sensor settings
SENSOR
The sensor settings are in the
SYSTEM MENU
under
SENSOR
, and there select
the sensor you want to use by browsing with or and confirm with .
