20
ACTIVATE
The program is started with
ACTIVATE
, and from there you can choose to use
TIMER SETTING
. If you want to start the program without the timer function,
select
NO
and the program will then be active until another program is start-
ed. If you select
YES
, the program will remain active for the selected time and
will then return to the previously used program.
The first time the program is used, the time and temperature must be set
under
CHANGE
. All the settings are saved in the memory and are not lost
even if a power cut occurs, but, in this case, the clock must be reset to
obtain normal functionality again.
CHANGE
To make changes to the settings, select
CHANGE
;
TEMP
is used to set the
temperature you want the thermostat to maintain when the program is acti-
vated,
TIMER
is used to reset the current start and stop times;
REMOTE
is used
to activate remote control if applicable.
RESET
There is also a reset function, which resets the program to the factory set-
ting, +27 °C, and deletes all the time settings.
REMOTE CONTROL
The holiday program can be controlled via a remote control unit. The unit
is connected to the applicable terminal block; see the wiring diagram. The
holiday program is activated when the remote control input is closed, and
is deactivated when it is opened again. The thermostat then returns to its
previous setting.
Personal program
PERSONAL
Manual setting of the program allows optimisation of energy consumption to
suit just your needs by making settings for four events each day:
WAKE
,
AWAY
,
HOME
and
NIGHT
. There are three menu alternatives to choose between:
ACTIVATE
,
CHANGE
and
RESET
.
The personal program
PERSONAL
is under
PROGRAM
in the
MAIN MENU
. The
temperature can be set b5 °C and +45 °C; the factory setting is
+22 °C.
ACTIVATE
The program is started with
ACTIVATE
and it remains active until another pro-
gram is started. The first time the program is used, the time and temperature
must be set under
CHANGE
. All the settings are saved in the memory and are
not lost even if a power cut occurs for a period longer than two days, but, in
this case, the clock must be reset to obtain normal functionality again.
CHANGE
