23
Reset connection time
CONN TIME
The connection time is shown in hours; as with a vehicle trip meter, it shows
the number of hours an installation has been connected for since it was last
reset. This is beneficial if you want to calculate the energy consumption for
a certain period. The thermostat also has a counter that cannot be reset,
which shows the total hours the installation has been connected for.
To see the total and momentary connection times, press when the thermo-
stat is in display mode.
The reset function is in the
SYSTEM
menu under
RESET
; from here, select
CONN TIME
. This is preset to
NO
and is changed to
YES
by pressing and
confirming with .
Reset the operation mode settings
OP MODE
The settings can be reset in
OP MODE COOLING
. All programs are reset and the
temperature and sensor settings return to the output values. Resetting does
not affect the choice of
OP MODE
,
LANGUAGE
or setting for
DATE/TIME
.
The reset function is in the
SYSTEM
menu under
RESET
, and there select
CONN
TIME
. This is preset to
NO
and is changed to
YES
by pressing and confirm-
ing with .
Reset factory settings
FAC SET
The thermostat can be entirely reset to factory settings. All programmed
data is deleted and the start up menu is opened. If you choose to reset the
thermostat, it is important to know the operation mode it uses and the con-
figuration of the sensors.
The only way to change operation mode is to reset to the factory settings.
The reset function is in the
SYSTEM MENU
under
RESET
; from here select
FACTORY SETTINGS
. This is preset to
NO
and is changed to
YES
by pressing
and confirming with .
