PRINTING
4.3 Removing 3D objects from the print bed.
4.4 Materials.
4.5 Clay.
4.6 Storage.
Once the Eazao Zero has completed printing your 3D printed object follow these steps
to remove it from the print bed.
1. Once the print is completed,turn off your 3D printer.
2. Remove the printing board and replace it with a new board.
Note: Check if the printing board is damaged and replace if needed replacement
printing board can be purchased at
https://www.eazao.com
The Eazao Zero is designed to be only used with clay .Only use genuine Eazao clay as
using generic clay may damage your 3D printer and may void your warranty. Extra clay
including multiple colors and clay types are available from the online store at :
https://
www.eazao.com
Extruder Setting Temp:
0° C
Official Name:
Eazao Clay
Printing Level:
Basic
Advantages:
Good liquidity
Not easy to block
Strong support
Disadvantages:
Need sintering
It needs to be used up within 1-2
weeks after purchase
Finishing:
Can be post-processed and
polished
Can be glazed
The clay needs to be soft. If it is left for too long, it will become hard and unusable.
Please follow the tips below.
*Store in a sealed airtight bag/container, we recommend using a vacuum sealed bag.
* Keep it in a cool place, avoid direct sunlight, cover the cartridge with a wet towel, and
spray water frequently.
*Because of the organic matter in the clay, it will be moldy if placed for a long time, but
it will not affect the use.
15
Summary of Contents for Zero
