4 Geräte betreiben
4.1 Einstellungen
ZB12-…, ZB32-…
11/16 MN03407004Z-DE/EN
www.eaton.com
21
4 Geräte betreiben
4.1 Einstellungen
Vor der Erstinbetriebnahme des Motorschutzrelais muss der Motor-
nennstrom mit Hilfe einer Stromeinstellscheibe am Relais eingestellt werden
(
Tabelle 3, Seite 7 und Tabelle 4, Seite 8).
4.1.1 Rücksetzung
Die Motorschutzrelais ZB12-…/XTOB…BC1 und ZB32-…/XTOB…CC1 bieten
mit Hilfe des Wahlknopfes Reset die Möglichkeit, zwischen einem automati-
schem Wiederanlauf „A“ und einer Handrücksetzung „H“ zu wählen.
Abbildung 12: Schaltmöglichkeiten mit Wahlknopf Reset
Die Stellung „H“ verhindert einen automatischen Wiederanlauf und ist
werksseitig bei den Motorschutzrelais vorgewählt. In der Stellung „H“ muss
das Relais nach einer Auslösung händisch durch Drücken dieses Wahlknop-
fes zurückgesetzt werden.
4.1.2 Test
Die Motorschutzrelais ZB12-…/XTOB…BC1 und ZB32-…/XTOB…CC1 sind
mit einer Taste „Test“ versehen, in der eine Doppelfunktion integriert ist.
Abbildung 13: Schaltmöglichkeiten der Taste „Test“
Ein Drücken der Taste hat das Öffnen des Hilfskontaktes 95-96 zur Folge und
kann zum Abschalten des Schützes genutzt werden.
VORSICHT
Bei einem kühlen Aufstellungsort des Motorschutzrelais
(z. B. -5 °C) und einem warmen Aufstellungsort des Motors
(z. B. 40 °C) kann es im Überlastfall zu einer verzögerten Auslö-
sung kommen, wenn die Geräte im unteren Stromeinstell-
bereich betrieben werden.
H
A
TEST
NC 95
NC 96
NO 97
NO 98
OFF