Segment3–1, 3–5, 3–6, 4–19, 4–22, Fig. 3–2B
Segment Definitiion4–4
Segment Edit Screen4–13
Segment Gains4–7, Fig. 4–2, Fig. 4–5
Segment Parameters4–10, 4–13, Fig. 3–2B, Fig. 4–5
Set Open/Closed Loop ControlFig. 3–10
Set Position Reference3–22, 3–23, 3–35
Set–Up Axis Configurations3–8
Set–Up Checklist3–37
Silkscreen LabelFig. 1–1
Single–Ended Analog Output1–3, 2–11, 2–16, Fig. 2–10
SO2–11, 2–16
Specifications1–6
Stop Bits1–7, 3–18, 5–8, Fig. 3–8, Fig. 3–9
Stop Key4–28, 4–29, 5–4
System Parameters3–17, Fig. 3–4, Fig. 3–8
Target Position4–4, 4–5, Fig. 3–2B
Target Speed 4–20, 4–21, Fig. 3–2B
Target Velocity4–4, 4–5, 4–14
Torque Enable2–12, 2–13, 2–21, 3–19, 3–20, 3–22, 3–23
TQ2–12, 2–13, 2–21, 3–19, 3–20
Travel Limits3–13, 3–20, 3–37, 4–1, 4–15
Two Segment Profile4–14, 4–15
TX2–31, 5–8
Typical Two Axis Wiring2–14, Fig. 2–8
Unconditional Jump4–6
Uncontrolled Motion5–3
Up/Down Arrows3–3
V+2–6, 2–7, 2–26
VAR3–1, 3–2, 3–8
Variable Mode3–1
Variables3–14, 4–4, 4–7, 4–19, 4–22, Fig. 4–2, Fig. 4–5
VEL2–12, 2–13, 2–21, 3–19, 3–20
VEL13–9
VEL23–9
Velocity2–21, 3–5, 3–11, 3–16, 4–3, 4–4, 4–5, 5–5, A–2
Velocity Command3–9, 5–5
Velocity Enable3–22, 3–23
Word LengthFig. 3–8, Fig. 3–9
