Eaton Vickers SMC20, Product Support

Page: 20 / 52

AXIS[ 1]
↑
QUIT F1 QUIT to Previous Screen
POSITION AXIS F2 Select Axis 1 or 2
ENG UNIT SAVE F3 SAVE newly entered value to RAM memory
[1.0000 ]
↓
<EDT F4 Select engineering unit type
AXIS[ 1]
↑
QUIT F1 QUIT to Previous Screen
HOME AXIS F2 Select Axis 1 or 2
DIRECTION SAVE F3 SAVE newly entered value to RAM memory
[RETURN ]
↓
<SEL F4 Selects RETURN or ADVANCE Direction
AXIS[ 1] (VAL)
↑
QUIT F1 QUIT
FOR JOG SPEED AXIS F2 Select 1 or 2
SELECT VARIABLE <VAR F3
OR ENTER VALUE
↓
<VAL F4
AXIS[ ]
↑
QUIT F1 QUIT to Previous Screen
JOG SPEED IS AXIS F2 Select 1 or 2
ASSIGNED TO SAVE F3 SAVE to RAM
VARIABLE #C
↓
<EDT F4 Enter Variable Number
AXIS[ 1]
↑
QUIT F1 QUIT to Previous Screen
JOG SPEED AXIS F2 Select 1 or 2
VALUE (IN/SEC) SAVE F3 SAVE to RAM
[ ]
↓
<EDT F4 Enter JOB Speed
FT = Foot MM = Millimeter
RV = Revolution CM = Centimeter
EU = Engineering Unit (counts)
Figure 3-6. Engineering Unit, Home Direction
and Job Speed Screens
19
Axis Parameter Screens
These screens are identical except for
the parameter name.
POSITION ENG UNIT Position
feedback counts per measurement
length. (Depends on Transducer and
units used).
LOOP UPDATE RATE
Range .2 to 19
ms. This parameter can be useful when
tuning an axis for performance. The
Default Value is 0.200ms.
MAXIMUM POSITION
(EU)
MINIMUM POSITION (EU)
MAXIMUM POSITION
ERROR
(EU)
IN POSITION ERROR (EU)
MAXIMUM SPEED (EU/SEC)
CREEP SPEED (EU/SEC)
Error
recovery
speed
MAXIMUM
ACCELERATION
(EU/SEC^2)
MAXIMUM
DECELERATION
(EU/SEC^2)
D/A OFFSET (D/A COUNTS)
HOME POSITION (EU)
HOME OFFSET (EU)
HOME SPEED (EU/SEC)
For each above,
F1
Quit, Go to
previous
screen
F2 Axis, Selects
1 or 2
F3 Save, Saves
newly entered
value to RAM
Memory
F4 Brings up the
Parameter
screen
Push Enter.