URING 12-24-LLC SF6 INSULATED COMPACT RMU SWITCHGEAR WITH VACUUM CIRCUIT BREAKER
The use of lifting beams is required for cubicle assemblies with control boxes as the sole
exception, slings or chains may be used if the cubicles of the assembly have identical height
control boxes installed.
• If it is not possible to lift using the mentioned
methods, rollers may be used underneath
the switchgear. Another option is to slide the
cubicles over rods (these same rods can be
used to help get over the cable pit).
• To handle 5 functional unit assemblies
(consisting of either coupled modules or
compact assemblies associated with modules),
use lifting systems (slings, lifting beam, etc.)
with a pull angle greater than 65º and less
than 115º in order to prevent possible damage
to the cubicles during hoisting.
Lifting of a set of 3
URING
functional units with a forklift truck
Lifting of a set of 5
URING
functional units with lifting beam
and chains