URING 12-24-LLC SF6 INSULATED COMPACT RMU SWITCHGEAR WITH VACUUM CIRCUIT BREAKER
2. HANDLING AND TRANSPORT
Important:
During transport, the switchgear must be perfectly seated and fixed so that it cannot move
about and possibly damage the equipment.
The switchgear must always be kept upright, directly
on the ground or on a pallet depending on the type of
handling involved.
To handle assemblies of up to 5 functional units, one of
the following methods must be used:
• Using a forklift truck or pallet-jack.
• Lifting using slings or chains fixed to the lifting supports
on the sides of the top of the cubicle. The angle of pull
should be as vertical as possible (with an angle greater
than 60º from the horizontal).
Lifting of a
URING
cubicle with a fork-lift truck
Lifting of
URING
cubicles with chains
