Transmission appearance may differ, procedure is the same.
General Information
3
H/45-4
H/45-3
H/45-2
H/45-1
Air System
How to Install the Air Supply Hoses for LO and HI Range
Special Instructions
Make sure air hoses are not damaged.
Install the air hoses at their proper locations.
All externally threaded
1
⁄
4
" air fittings that are not coated
with pre-applied thread sealant must be coated with
Eaton sealing material #71209 or equivalent for at least
3 complete and consecutive threads.
For the
1
⁄
4
" I.D. air hoses, install the fixed nut end first.
To install the hoses, the air filter/regulator must be in
position.
Special Tools
Typical service mechanic tools
To Install
1.
Connect one air supply hose end to the range
cylinder HI range supply port.
2.
Connect the other end to the slave valve HI range
supply port.
3.
Connect one air supply hose end to the range
cylinder LO range supply port.
4.
Connect the other end to the slave valve LO range
supply port.
Final Check
Make sure air lines are not kinked.
1
2
3
4
Transmission appearance may differ, procedure is the same.
6
External Parts
How to Use This Manual
This manual is designed to provide detailed information
necessary to service and repair the Eaton
Fuller
transmissions listed on the front.
As outlined on the first page, the manual has been
divided into its main components: external parts, shift
bar housing, front section, auxiliary section, and
options (if applicable). Each component has its own
tabbed section. Each tabbed section has its own table
of contents and procedural flow charts. The table of
contents lists the procedures. The flow charts
represent the order in which the transmission should
be disassembled or assembled. The procedures have
two parts, disassembly or removal and reassembly or
installation.
The following is the general layout with descriptions.
1. Heading
Gives a general description of the topic covered.
2. Subhead
Gives a more specific description of the topic covered.
3. Special Instructions
Procedures that need to be done before performing the
topic covered. Hints that will make the procedure
easier to preform.
4. Special Tools
For most procedures typical service mechanic tools are
all that is required, but sometimes a "special" tool is
needed to prevent damaging the transmission.
5. The "How to"
The actual procedure to be performed.
6. Illustrations and pictures
To further help explain and illustrate the procedures.
7. Final Check
Must do's for proper performance.
8. Page Number/Section
Tells what page your on and in what section.
2
6
8
7
5
4
3
1