4
www.eaton.com/wireless
call toll free: 1-800-663-8806
DM-R260-0056A R1
READ ALL INSTRUCTIONS
Installation
PROVIDE A SAFETY CUTOFF SWITCH. If maintenance is required, the radio must be disconnected from power
USE PROPER WIRING. Loose or frayed wires can cause system failure, intermittent operation, machine damage, etc.
DO NOT INSTALL IN HOT AREAS. This apparatus can be damaged by heat in excess of 158° F (70° C)
Personal Safety
MAKE SURE MACHINERY AND SURROUNDING AREA IS CLEAR BEFORE OPERATING. Do not activate the remote
system unless it is safe to do so.
TURN OFF THE BASE STATION POWER BEFORE WORKING ON MACHINERY. Always disconnect the remote sys-
tem before doing any maintenance to prevent accidental operation of the machine
Care
KEEP DRY. Do not clean the RCU / Base Station under high pressure. If water or other liquids get inside the RCU bat-
tery or Base Station compartment, immediately dry the unit. Remove the case and let the unit air dry
CLEAN THE UNIT AFTER OPERATION. Remove any mud, dirt, concrete, etc. from the unit to prevent clogging of
buttons, switches, etc. by using a damp cloth.
Maintenance / Welding
DISCONNECT THE BASE STATION BEFORE WELDING on the machine the Base Station is connected to. Failure to
disconnect will result in the destruction of the Base Station.
Safety Precautions
CAUTION:
Changes or modifications not expressly approved by the party responsible for compliance could
void the user’s authority to operate the equipment.
Failure to follow the SAFETY PRECAUTIONS may result in radio equipment failure and se-
rious personal injury.
