25
www.eaton.com/wireless
call toll free: 1-800-663-8806
DM-R260-0056A R1
Indicators / Items
Description
Occurs whenever a function is pressed. Will also remain on momentarily on Power Up.
RCU is in Operating mode. (Data is sent to and received from R260)
Low Battery. (
Note:
Low batteries will last approximately 1 hour once the Low Battery light
begins to flash).
Action: Change or Recharge Batteries
Out of range audio
notification
When the RCU moves out of radio range of the R260, the RCU beeps to alert the operator.
Move the RCU closer to the R260 within radio range to re-link.
Other audio notifi-
cations
Other audio notifications can also be used (defined under application control) to alert the op-
erator when warnings or alarms happen.
Tether operation
(Icon displayed when
RCU is connected
using a tether cable)
The tether connection is used to replace radio communication. When the tether is con-
nected, the RCU is guaranteed not to transmit any RF signals. This may be a require-
ment around some construction zones.
If the RCU is operating and communicating with the R260 when the tether cable is
plugged in or removed, the RCU will cease communications and turn itself off.
The tether also provides power to the RCU. When it is plugged in, the RCU will use this
power to recharge its batteries (assuming they and the rechargeable type). If the RCU is
turned on while charging the status bar will show a small charging icon next to the battery
icon. If the RCU is turned off, the display will show a large battery symbol to indicate
charging: . When the battery is fully charged and the tether remains plugged in the
display will show: .
An internal error is preventing the RCU from operating (When available, a specific error mes-
sage is displayed on the screen.)
Received Signal
Strength
(Top left corner of the
display)
Strong Weak No signal
Operations - TD3100 RCU
Light Legend
Solid
Slow
Flash
Fast
Flash
Red
Solid
Green
Solid
Red & Green
Alternating
Yellow
Solid
