System description
SmartWire-DT
16
02/11 MN05006002Z-EN
Different I/O modules are available:
• With digital inputs and outputs in the form of transistors
or relays
• With analog inputs and outputs
• For temperature measurement
SmartWire DT function elements M22-SWD…
The M22-SWD… function elements are treated in the same
way as RMQ-Titan pilot devices, but can be connected easily
to the SmartWire-DT network without any further wiring.
The SmartWire-DT function elements are combined as usual
with the front elements of the RMQ-Titan system.
SmartWire-DT function elements are available for front
mounting or for base fixing.
For a short description of how you install your M22-SWD…
function elements please refer to Section “M22-SWD…
function elements”, page 58.
SmartWire-DT protective modules
SmartWire-DT modules DIL-SWD-32-001 and
DIL-SWD-32-002 (Automatic/Manual) can be combined with
circuit breakers DILM7 to DILM38. This allows motor
starters, consisting of a protective motor switch PKZ and a
circuit breaker DILM to also be combined with the system.
The DIL-SWD-32… modules are supplied with 24 V DC
control voltage for the contactors as well as the device
supply voltage through the 8 core SmartWire-DT ribbon
cable.
Function element for PKE12/32
SmartWire-DT module PKE-SWD-32 connects a motor
starter-contactor combination based on electronic motor-
protective circuit-breaker PKE to the SmartWire-DT commu-
nication system. In addition to contactor actuation and posi-
tion feedback, it also transmits analog values, such as
current and “triggered” status.
www.comoso.com
